Standard Software - ALGE-Timing TdC 8000 Manual

1.1. Standard Software:

Programm
Sequential
Split Sequ.
Parallel Diff.
Parallel Net
Dual Timer
Speed Skiing
TdC Test
SPLIT:
Program for timing with intermediate time. You can adjust the precision. You can make up to 256
heats. You have a start-channel (c0), a finish-channel (c1), and up to eight intermediate-channels
(c2 to c9)
SPLIT SEQUENTIAL (SPLIT SEQU.):
Program for timing with lap time and run time. You can adjust the precision. Previous to the race
you must adjust the amount of laps. You can make up to 256 heats. You have a start-channel (c0),
a finish-channel (c1), and up to eight intermediate-channels (c2 to c9)
PARALLEL SLALOM:
Parallel Diff:
It shows the difference time between the two competitors and the winning course.
Parallel Net:
It measures the net time of each course and the difference time between both competitors. It is
also possible to get the total time in the second run for net- and difference time.
DUAL TIMER:
Net timing with intermediate time on two curses with a maximum of one competitor on each
course. The start can be parallel or separate for both curses.
SPEED:
Program to measure the speed in either km/h, m/s or m.p.h.. You can adjust the measuring dis-
tance between 1 and 9999 m.
SPEED SKIING:
Program to measure the speed and time for speed skiing.
TdC-TEST:
Program to test the TdC 8000:
Version: E-19-03-07
TdC 8000
Program Number
Split Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Speed Program 7
Program 8
Program 9
Page
63
in preparation
66
70
74
80
84
88
90
Program 1
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Page 7
Page 7