Cables; Cable Plugs And Cable Sockets; Other Accessories (Within Scope Of Delivery) - Roland R1000 Series Manual

B0060191 / Rev. 1.7
12.3

Cables

The standard cable length is 2 meters. Customized lengths up to 50 meters can be ordered;
larger lengths upon request.
Order information
SCI20S-GG
SCI20S-GW
SCI20S-GG-TE
12.4

Cable plugs and cable sockets

Order information
2277018
2276032
2276038
2276034
2277705
2276539
2277708
2276116
2277704
2277017
S0002750
12.5

Other accessories (within scope of delivery)

Order information
2279066
RPP7
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000-series I20
with integrated fieldbus interface
Specification
Superflex TRONIC[C]PUR TP
4 x 2 x 0,25 mm²
Superflex TRONIC[C]PUR TP
4 x 2 x 0,25 mm²
Superflex TRONIC[C]PUR TP
4 x 2 x 0,25 mm²
Description
Cable plug (control unit side), 7-pin, S12KCC-P07MPH0-6500, for sensor cable
Cable socket, 7-pin, S12K0C-P07LPH0-6500, for sensor cable
Cable socket 90°, 7-pin, W12K0C-P07LPH0-6500, for sensor cable
Cable socket, 7-pin, K12KCC-P07LPH0-6500, for extension cable
Cable plug (control unit side) for outputs, 8-pin, M12, Binder series 713
Cable socket, for incoming Bus, 5-pin, M12, Binder series 715 (B-coded)
Cable plug for outgoing Bus, 5-pin, M12, Binder series 715 (B-coded)
Cable socket, for incoming Bus, 5-pin, M12, Binder series 715 (A-coded)
Cable plug for outgoing Bus, 5-pin, M12, Binder series 715 (A-coded)
Cable plug for ProfiNet IO, EtherCAT and EtherNet/IP, 4-pin, D-coded, M12
Cable socket, complete, for voltage supply and inputs, 8-pin, HAN8U
Description
Replacement cable for USB connection to the PC, 1.8 m length, for data backup
Software for data backup and firmware update
Manual
Description
Cable for connecting the sensors
IS / IE20-30GS, IS / IE42-30GS with the I20,
both cable ends with quick disconnect, with straight cable
plug at the control unit side and straight cable socket
at the sensor side.
Cable for connecting the sensors
IS / IE20-30GS, IS / IE42-30GS with the I20,
both cable ends with quick disconnect, with straight cable
plug at the control unit side and angular cable socket
at the sensor side.
Extension cable for SCI20S-GG and SCI20S-GW,
as well as for sensors ISQ/IEQ42FS,
to be inserted between control unit and sensor cable.
Order data
159