Frame Mapping Table - RTS ODIN Manual

124 Menu System Description
To remove a frame from the system, do the following:
Select the Split Frame icon.
1.
The Split Frame message appears.
Select the Split button.
2.
The press Home button 5 times message appears.
Press the Home button five times.
3.
The frame reboots.
Re-cable the IFL connections for the new intercoms created.
4.

Frame Mapping Table

The Frame Mapping Table screen is used to create the relationship between multiple frames forming one intercom and assigning
the frame number of each frame within the intercom.
Configuration | System | Frame Mapping Table
FIGURE 53.
NOTE: The current frame is shown in gray and the IP address and MAC address of the frame cannot be modified. Only
existing frames in blue can be modified. If entering IP addresses and MAC addresses in empty fields on this screen
acts as a placeholder only for other frames planned for the system. It does not configure system to add them.
Frame Field
The Frame field is used to select the frame to be viewed.
IP Address Field
The IP Address field is used to enter the IP address of the frame's Control Port.
NOTE: The IP and MAC Addresses for the current frame cannot be edited.
MAC Address Field
The MAC Address field is used to enter the MAC Address of the frame's Control Port.
ODIN Intercom Matrix