Basic Operation; Navigating The Menu - RTS ODIN Manual

Navigating the Menu

The ODIN menu structure is separated into four logical sections: Status, Configuration, Intercom Setup, and Alarms. The menu is
accessible using the keypad, the shaft encoder knobs, or a combination of both.
ODIN Keypad and Encoders
FIGURE 5.
Keypad Operation
Keypad Character/
Mode
1/STATUS Go to STATUS menu
2/UP Scroll info up
3/CONFIG Go to CONFIG menu
4/LEFT Rotate icon highlight
CCW
5/HOME Go to Port Status
Overview
6/RIGHT Rotate icon highlight
CW
7/ALRMS Go to ALARM menu
8/DOWN Scroll info down
9/SETUP Go to SETUP menu
0/SHIFT Toggle SHIFT state
*/CLR Move to info top
#/SEL Invoke highlighted
icon
Home Port Status
Overview
Go to STATUS menu Go to STATUS menu
Scroll info up
Go to CONFIG menu Go to CONFIG menu
Go to HOME screen Go to HOME screen
Go to ALARM menu Go to ALARM menu
Scroll info down
Go to SETUP menu
Toggle SHIFT state
Go to HOME

Basic Operation

Menu
(navigating)
Move to previous sibling Move to previous
in menu field (up)
Move icon highlight left Move to prev field
(left)
Go to field (top/left)
Move icon highlight right Move to next field
(right)
Move to the next sibling Move to next field
menu (down)
Go to SETUP menu
Toggle SHIFT state Toggle SHIFT state
Move up one menu level Exit form (prompt if
changes)
Invoke highlighted icon Initiate edit on
selected field
CHAPTER 2
Form Form
(navigating) +
SHIFT)
Exit form (abort
changes)
Exit form (save
changes)