Rack Mounting Instructions - RTS ODIN Manual

ODIN Intercom Matrix

Rack Mounting Instructions

CAUTION: Ensure the frame is securely mounted to avoid uneven mechanical loading. Use all fasteners, as defined in the
installation instructions.
Rack Mounting (without Optional Rear Supports)
To mount ODIN in a rack, do the following:
Using four rack screws (not supplied), secure ODIN into the rack.
>
Rack Mounting (with Optional Rear Supports)
Rear Rack Mounting Components
IMPORTANT: The rear support brackets are an optional piece of equipment. It is recommended to use these support
brackets in high vibration environments, such as trucks.
Mounting Components
TABLE 2.
8 - Pan head screw M3 x 6mm
8 - Flat-head screw M3 x 6mm
8 - Internal tool lock washer M3
8 - Flat washer 3.2mm ID x 7mm OD x 0.5mm thick
2 - Matrix side brackets
2 - Rear side brackets
Component Descriptions
Installation and Maintenance 65