3-7-2
Resetting the Absolute Encoder from the Sysmac Studio
The absolute encoder must be set up the first time it is used, and when the rotation data is initialized to 0.
1
Right-click the Servo Drive and select Setup and Tuning from the menu.
The Setup and Tuning Portal appears.
2
Click the Quick Parameter Setup and I/O Monitor Button.
The following dialog box appears. Click the Yes Button.
The Motor and Encoder setting Page appears.
NJ/NX-series Startup Guide for Motion Control (W514)
3 Setting Up a Single-axis Servo System
3
3-35