Ricoh K-C3.5L Service Training page 90

Paper Size Detection - Paper Tray
Slide 90
More on Paper Size Detection
Using a non-standard paper size
To use a non-standard paper size, set the dial to the * mark
Then, set the size with a User Tool (System Settings – Tray Paper Settings –
Tray Paper Size).
The machine disables paper feed from the tray if the paper size cannot be
detected (the paper size cannot be detected if the paper size actuator is broken
or if no tray is installed).
Paper size table
On = Not pushed, Off = Pushed
Paper Size
A3, 11" x 17"
A4 LEF
A4 SEF, 8½" x 11"
A5 LEF, 8½" x 14"
8½" x 13"
11" x 8½"
* (asterisk)
Dial and
microswitch mechanism.
Paper size sensor
detects position of dial
selected by user
SW 1 SW 2
Off Off
On On
On Off
Off On
On Off
Off On
Off Off
90
Model K-C3.5L
User must
set dial to correct size.
(Size table is in the notes
below.)
SW 3
Off
Off
Off
On
On
Off
On