Ricoh K-C3.5L Service Training page 52

ID Sensor Pattern Production Timing
The ID sensor pattern is made at the following
times:
While machine is recovering from energy saver
mode, or while machine starts, BICU ignores ID-
sensor signals if fusing temperature is at
specified value or higher.
Slide 52
No additional notes.
During warm-up at power on
When the machine starts warming up from energy saver
mode and the temperature is less than the target
temperature as set with SP Mode.
When the machine starts warming up from energy saver
mode and the machine prints more than 100 prints.
» Adjustable from 30 degrees to 90 via SP 2994)
52
Model K-C3.5L