Ricoh K-C3.5L Service Training page 181

SP Modes - Symptom Troubleshooting - 2/3
SP 2301: Transfer current
SP 2802: Developer mixing
Slide 181
No additional notes.
SP 2301 1-2: Increase if thicker paper than
normal is used in the paper trays
SP 2301 4: Increase if there is dirty background
on the rear side
» SP 2996: Enable this if there is dirty background on the
reverse side of the first copy of a job. The transfer roller
will be cleaned before each job. The job will take slightly
longer.
Use this to prevent dirty background when the
machine has not been used for a long time.
181
Model K-C3.5L