Ricoh K-C3.5L Service Training page 115

Duplex inverter rollers
Exit rollers
Slide 115
More on Overview
The duplex unit consists of an inverter table above the copy exit, and a duplex
unit attached to the right side of the machine.
The duplex unit is in the B269/B244 models only
Overview
Junction gate
Duplex entrance
sensor
Upper transport
roller
Middle transport
roller
Duplex exit
sensor
115
After fusing, the
junction gate directs
the paper either:
Out through the exit
rollers
Up to the duplex
inverter rollers
If paper goes to the
duplex inverter rollers:
First, it goes to the
inverter table.
Then it is reversed
through the duplex
unit and back into
the machine to print
side 2.
Model K-C3.5L