Warranty And Liability - Siemens SIMATIC S7-1500T Getting Started

Warranty and liability

Note
The Application Examples are not binding and do not claim to be complete regarding the
circuits or equipment shown, or every eventuality. The Application Examples do not
represent customer-specific solutions. They are only intended to provide support for typical
applications. You are responsible for ensuring that the described products are used
correctly. These Application Examples do not relieve you of the responsibility to use safe
practices in application, installation, operation and maintenance. When using these
Application Examples, you recognize that we cannot be made liable for any damage/claims
beyond the liability clause described. We reserve the right to make changes to this
Application Example at any time without prior notice. If there are any deviations between the
recommendations provided in this Application Example and other Siemens publications –
e.g. catalogs – the contents of the other documents have priority.
We do not accept any liability for the information contained in this document. Our liability for
damages resulting from using the examples, notes, programs, configuration and
performance data, etc. described in this Application Example regardless of the legal
background is excluded unless required by law, e.g. in cases of willful misconduct, gross
negligence, personal injury or death, failure to achieve guaranteed characteristics, fraudulent
concealment of a defect or in case of breach of fundamental contractual obligations. The
damages for breach of a substantial contractual obligation are, however, limited to
foreseeable damage, typical for the type of contract, except in the event of intent or gross
negligence or injury to life, body or health. The above provisions do not imply a change of
the burden of proof to your detriment.
Any form of duplication or distribution of these Application Examples or excerpts hereof is
prohibited without the express consent of Siemens AG.
S7-1500T Getting Started with Kinematics
Getting Started, 12/2018, A5E46089528-AA
1
5