Program Section Product Type 2 - Siemens SIMATIC S7-1500T Getting Started

9.5

Program section product type 2

Preconditions
To run the program section for product type 2, the result of the product type query must be
"2" and the tag "#statStateAuto" must have the value "#STATE_PRODUCT_2_DELIVER".
Insert the query of the tag "#statStateAuto".
If the automatic mode is processed in the first cycle, the tag "#statStateAuto" has the value
"#STATE_CLEAR". In this case, insert the command to reset the Execute parameters of the
motion instructions in program section 2.
S7-1500T Getting Started with Kinematics
Getting Started, 12/2018, A5E46089528-AA
Create a program for automatic mode
9.5 Program section product type 2
49