Warranty And Liability - Siemens SIMATIC S7-1200 CP 1242-7 V2 Application Example

Warranty and Liability

Warranty and Liability
The Application Examples are not binding and do not claim to be complete with regard to
Note
configuration, equipment or any contingencies. The Application Examples do not
represent customer-specific solutions. They are only intended to provide support for
typical applications. You are responsible for the correct operation of the described
products. These Application Examples do not relieve you of the responsibility of safely
and professionally using, installing, operating and servicing equipment. When using these
Application Examples, you recognize that we cannot be made liable for any
damage/claims beyond the liability clause described. We reserve the right to make
changes to these Application Examples at any time and without prior notice. If there are
any deviations between the recommendations provided in this Application Example and
other Siemens publications – e. g. catalogs – the contents of the other documents shall
have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of
the examples, information, programs, engineering and performance data etc.,
described in this Application Example shall be excluded. Such an exclusion shall
not apply in the case of mandatory liability, e.g. under the German Product Liability
Act ("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life,
body or health, guarantee for the quality of a product, fraudulent concealment of a
deficiency or breach of fundamental contractual obligations ("wesentliche
Vertragspflichten"). The compensation for damages due to a breach of a
fundamental contractual obligation is, however, limited to the foreseeable damage,
typical for the type of contract, except in the event of intent or gross negligence or
injury to life, body or health. The above provisions do not imply a change of the
burden of proof to your detriment.
Any form of duplication or distribution of these Application Examples or excerpts
hereof is prohibited without the expressed consent of Siemens AG.
Siemens provides products and solutions with Industrial Security functions that support
Security
the secure operation of plants, systems, machines and networks.
informa-
In order to secure plants, systems, machines and networks against cyber threats it is
tion
necessary to implement (and to maintain continuously) a holistic, state-of-the-art Industrial
Security concept. With this in mind, Siemens' products and solutions are only part of such
a concept.
It is the client's responsibility to prevent unauthorized access to his plants, systems,
machines and networks. Systems, machines and components should only be connected
with the company's network or the Internet, when and insofar as this is required and the
appropriate protective measures (for example, use of firewalls and network segmentation)
have been taken.
In addition, the recommendations by Siemens regarding the respective protective
measures have to be observed. For more information on Industrial Security, visit
http://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them even
more secure. Siemens explicitly recommends to carry out updates as soon as the
respective updates are available and always only to use the current product versions. Use
of product versions that are no longer supported, and failure to apply latest updates may
increase customer's exposure to cyber threats.
In order to always be informed about product updates, subscribe to the Siemens Industrial
Security RSS Feed at http://www.siemens.com/industrialsecurity.
TeleService with TCSB
Entry-ID: 56720905, V1.0, 10/2016
2