Warranty And Liability - Siemens LOGO! 8 Manual

Warranty and Liability

Warranty and Liability
Note
The application examples are not binding and do not claim to be complete with
regard to configuration, equipment or any contingencies. The application
examples do not represent customer-specific solutions. They are only intended
to provide support for typical applications. You are responsible for the correct
operation of the described products. These application examples do not relieve
you of the responsibility of safely and professionally using, installing, operating
and servicing equipment. When using these Application Examples, you
recognize that we cannot be made liable for any damage/claims beyond the
liability clause described. We reserve the right to make changes to these
application examples at any time and without prior notice. If there are any
deviations between the recommendations provided in this Application Example
and other Siemens publications – e.g. Catalogs – the contents of the other
documents shall have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of
the examples, information, programs, engineering and performance data etc.,
described in this Application Example shall be excluded. Such an exclusion shall
not apply in the case of mandatory liability, e.g. under the German Product Liability
Act ("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life,
body or health, guarantee for the quality of a product, fraudulent concealment of a
deficiency or breach of fundamental contractual obligations ("wesentliche
Vertragspflichten"). The compensation for damages due to a breach of a
fundamental contractual obligation is, however, limited to the foreseeable damage,
typical for the type of contract, except in the event of intent or gross negligence or
injury to life, body or health. The above provisions do not imply a change of the
burden of proof to your detriment.
Any form of duplication or distribution of these application examples or excerpts
hereof is prohibited without the expressed consent of Siemens AG.
Security
Siemens provides products and solutions with industrial security functions that
informa-
support the secure operation of plants, solutions, machines, equipment and/or
tion
networks. They are important components in a holistic industrial security
concept. With this in mind, Siemens' products and solutions undergo continuous
development. Siemens recommends strongly that you regularly check for
product updates.
For the secure operation of Siemens products and solutions, it is necessary to
take suitable preventive action (e.g. cell protection concept) and integrate each
component into a holistic, state-of-the-art industrial security concept. Third-party
products that may be in use should also be considered. For more information
about industrial security, visit http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they occur, sign up for a product-
specific newsletter. For more information, visit
https://support.industry.siemens.com.
LOGO! Set 1
Entry ID: 109063024, V1.0, 07/2015
2