Adding PLC tags and data types
Add user constants
Insert all required user constants in the default tag table.
A list can be found in the section PLC tags (Page 16).
Adding data types
1. Add all required data types:
– typeAuxPosition
– typeExecute
– typePosition
– typePositionState
– typeSystemState
– typeUserInterface
2. Enter the required tags and data types in the declaration tables of the data types.
A list can be found in the section PLC data types (Page 16).
25
S7-1500T Getting Started with Kinematics
Getting Started, 12/2018, A5E46089528-AA
6