Table of Contents
Advertisement
4. Mount the hub
The HP Hub-16M can be mounted in two ways:
1.
2.
The hardware for mounting the hub is included in the accessory kit
(5064-2053) packed with the hub. Before mounting the hub, unplug it.
See Appendix G, "Safety and Regulatory Standards," for general mounting
precautions.
Rack or Cabinet Mounting
W a r n i n g
The rack or cabinet should be adequately secured to prevent it from
becoming unstable and/or falling over. Please see Appendix G, "Safety
and Regulatory Standards," for precautions and warnings associated with rack
mounting.
1.
2.
3.
in a rack or cabinet
on a table
Using a Phillips T-10 screwdriver, attach the mounting brackets to the hub
with #10-32 x 7/16" silver screws (included in the accessory kit).
Position the hub in the rack or cabinet and slide it up or down until the
rack holes line up with the bracket holes.
Then attach the hub to the rack with the #10-32 x 5/8" black screws and
black nylon washers included in the accessory kit with a Phillips cross-
head screwdriver. (Some cabinets require number 12-24 screws instead.
Make sure you have screws that fit your cabinet or rack before mounting
the hub.)
Installing the Hub
Installing and Configuring Your Hub
1-5
Advertisement
Table of Contents
