Connect The Hub To Your Network - HP J3188A Installation And Reference Manual

5. Connect the hub to your network

Reconnect the hub to either an AC power source or the RPS, depending on
which source you are using. With the hub mounted, you are now ready to
connect the hub to your network. Typical hub connections are:
hub-to-device connections. Connecting to network devices such as
computers, and printers.
hub-to-hub connections. Connecting to another HP 10Base-T hub, or
other Ethernet hub.
hub-to-network backbones. Connecting to a network backbone.
This section describes the different ways you can connect your hub to your
network.
Installing the Hub
Installing and Configuring Your Hub
1-7