HP J3188A Installation And Reference Manual page 47

pair ports; that is, the security parameters will all be set to NO (configured
address selection methods, and learned or assigned addresses are not
changed).
If you select
assign Each port (
ADDRESS
SELECTION
Port METHOD
1 CONTINUOUS
2 CONTINUOUS
3 CONTINUOUS
For each port, enter an address selection method (
MAC address, or press [Enter] to retain the current value. Continue this
process until all of the ports are displayed. If you do not want to configure
all twisted-pair ports, note that you can terminate the address selection
method by pressing [Enter] once. In either case, you are then prompted for
the settings for the Send Alarm and Eavesdrop Prevention parameters, as
described on the next page.
Console Command Reference
E
, a table like the following is displayed:
)
AUTHORIZED F, C, or
ADDRESS a MAC address
NONE
NONE
NONE
F
Managing the Hub
, or ), or a specific
C
3-17