Managing the Hub
Console Command Reference
Console Command Reference
Enter at least the first two letters of a command to execute it, such as HE for
the Help command. The Help command displays a screen like the following,
listing all commands.
Syntax Conventions on Help Screen:
The commands are described in the rest of the chapter.
HElp [cmd] or? [cmd]
To see the help screen shown above or, if you include a specific
command, the syntax and description of that specific console
command. For the [cmd] parameter, use the first two letters of the command
you wish to see.
Example:
3-4
< >
–
Indicates a required parameter.
[ ]
–
Indicates an optional parameter.
|
–
Used as a separator between acceptable variable values.
For example, SE <port|SHow|CLear> indicates that either a port ID, or the characters SH
or CL, must be entered after the SE command.
HE ST
(This displays help for the Status command.)