Idler Gear And Oil Pump - Perkins 100 Series Workshop Manual

6
100 Series

Idler gear and oil pump

To remove and to fit Operation 6-10
Special requirements
Clearance (B1) mm (in)
Standard Service limit
0,01 - 0,15 (0.0004 - 0.0060) 0,25 (0.0098) max
Extra shims may be required to achieve the standard clearance. To check the end float refer to Operation 6-13.
1
Workshop Manual, TPD 1377E, issue 4 75
This document has been printed from SPI². Not for Resale