100 Series
Valve depth
To correct
Special requirements
Engine model
102-05, 103-07
103-10
103-13, 103-15
104-19, 104-22
Rectify if the depth is more than the service limit.
Workshop Manual, TPD 1377E, issue 4
This document has been printed from SPI². Not for Resale
Depth (A1) mm (in)
Standard
0,70 - 0,90 (0.0276 - 0.0354)
0,85 - 1,15 (0.0335 - 0.0453)
0,85 - 1,15 (0.0335 - 0.0453)
0,65 - 0,95 (0.0256 - 0.0374)
1
3
Operation 3-21
Service limit
1,8 (0.071) max
1,8 (0.071) max
1,8 (0.071) max
1,8 (0.071) max
45