100 Series
Valve tip clearance
To check
The valve sequence is viewed from the front of the engine.
Rotate the crankshaft clockwise when viewed from the front.
Adjust the clearance of both intake and exhaust valves to 0,2 mm (0.0078 in).
Note: Always adjust when the engine is cold.
Engine model
2 Cylinder engines
3 Cylinder engines
4 Cylinder engines
Workshop Manual, TPD 1377E, issue 4
This document has been printed from SPI². Not for Resale
Valve overlap
No.1 Cyl
No.2 Cyl
No.1 Cyl
No.2 Cyl
No.3 Cyl
No.4 Cyl
No.2 Cyl
No.1 Cyl
No.3 Cyl
3
Operation 3-23
Adjust valves
3 and 4
1 and 2
3 and 6
2 and 5
1 and 4
1 and 2
5 and 6
7 and 8
3 and 4
47