Max Fuel Screw And Max Speed Screw - Perkins 100 Series Workshop Manual

6

Max fuel screw and max speed screw

To locate
Notes:
The max fuel screw (A1) and max speed screw (A2) should not be adjusted by the operator.
An anti tamper device (A3) may be fitted. Where this device is present, see Operation 6-9.
If adjustment of the maximum fuel screw or the no load speed is necessary, the adjustment must be done
on an engine test facility by personnel approved by Perkins Engines Company Ltd.
72
This document has been printed from SPI². Not for Resale
1
2
3
Workshop Manual, TPD 1377E, issue 4
100 Series
Operation 6-8