Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil removal
Stainless steel surfaces have a layer of
protective foil to prevent scratching dur-
ing transportation.
Do not remove the foil until the appli-
ance has been positioned in its final
location. Start at one of the top
corners.
Cleaning the appliance
Please refer to the relevant instruc-
tions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Danger to health!
The first three batches of ice cubes
made after the ice cube maker is
started up must not be consumed,
as the water will have been used for
the initial rinsing of the water supply
line.
This applies to the initial commis-
sioning as well as when using the
appliance again after it has been
turned off for a long time.
Clean the ice cube maker.
Before using for the first time
Connecting the appliance
Connect the appliance to the electri-
city supply as described in "Electrical
connection".
Standby
will appear in the display.
21