Switching On And Off; Before Using For The First Time; Safety Lock - Miele KWL 4712 S ed Operating And Installation Manual

Before using for the first time

The stainless steel surfaces have a
layer of protective foil to prevent
scratching during transportation.
^ Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^ Treat stainless steel surfaces with a
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele UK Spare Parts Department).
Follow the manufacturer's instructions
on the label.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^ Press the On/Off button briefly until
the temperature display lights up or
flashes.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.

Switching on and off

Switching off
^ Press the On/Off button briefly until
the temperature display becomes
dark.
The temperature display will go out and
the cooling process will be switched off.
(If this does not happen, the safety lock
is still activated).

Safety lock

The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
Activating or de-activating the safety
lock
^ Press and hold the constant humidity
button for approx. 5 seconds.
The constant humidity button indicator
light will start flashing and a
in the temperature display.
^ Press the constant humidity button
again.
;
will light up constantly in the display.
^ You can now choose between
;
1 by pressing the temperature
and
selector buttons:
0: the safety lock is de-activated,
1: the safety lock is activated.
;
will flash
;
0
11