Table of Contents
Advertisement
Mains water connection
Information about mains water
connection
The appliance may only be connec-
ted to the mains water supply by
suitably qualified persons.
Disconnect the appliance from the
power supply before connecting it to
the mains water supply.
Turn off the water supply before con-
necting the water supply line for the
ice-cube maker.
The water quality must conform to
the requirements for drinking water in
the country in which the appliance is
being installed (e.g. 98/83/EU).
The appliance must only be connec-
ted to the mains drinking water sup-
ply.
This appliance meets the requirements
of IEC 61770 and EN 61770.
Connection to the household water
supply must comply with the applic-
able regulations in the country in
which the appliance is being in-
stalled.
All units and systems used to supply
water to the appliance must also
comply with the applicable regula-
tions in the respective country.
The appliance is only suitable for
connection to a cold water line,
which
– is connected directly to the mains
water supply to guarantee circulation
of water in the cold water line.
78
Avoid connection to a water supply
in which the water might stagnate.
This can affect the taste of water and
ice cubes.
– withstands the operating pressure.
– complies with hygiene regulations.
The water pressure must be between
1,5 and 6 bar.
The stainless-steel hose supplied is
1,5 m long and must not be lengthened.
A faulty stainless-steel hose must
only be replaced by a genuine ori-
ginal Miele replacement hose (avail-
able from Miele or from your Miele
dealer). Ensure that the water hose is
suitable for drinking water.
A stopcock must be provided between
the stainless-steel hose and the house-
hold water supply to ensure that the
water supply can be cut off if neces-
sary.
Make sure that the stopcock is still
accessible after the appliance has
been installed.
Advertisement
Table of Contents
