Switching On And Off; Before Using For The First Time; Operating The Appliance; Switching On - Miele KWT 6322 UG Operating And Installation Instructions

Before using for the first time

Packaging material
^ Remove all packaging material from
the inside of the appliance.
Protective foil
Stainless steel surfaces have a layer of
protective foil to prevent scratching
during transportation.
^ Do not remove the foil until the
appliance has been positioned in its
final location. Start at one of the top
corners.
Cleaning and care
It is essential to follow the relevant
instructions in "Cleaning and care".
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.

Switching on and off

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").

Switching on

The mains connection symbol t will
appear in the display as soon as the
appliance has been switched on at the
mains.
^ Touch the On/Off sensor.
The mains connection symbol t will
then go out the appliance will start to
cool.
The sensors for the upper and the lower
wine conditioning zones will then
appear in the control panel. The
selected zone will be highlighted yellow
and the temperature of the selected
zone will show in the display.
The first time the appliance is switched
on the sensors for the wine conditioning
zones and the Alarm symbol ; will
flash until the selected temperature has
been reached in the zones.
19