Table of Contents
Advertisement
Changing the middle hinge
plate over
Pull off cover .
Unscrew hinge plate with the pro-
tective film underneath.
Turn hinge plate through 180° and
screw it with the protective film into
position on the opposite side.
The protective film protects the appli-
ance housing from damage.
Turn grey plastic cover through
180° and refit it in the hinge plate.
Tip: Plastic cover fits over the pro-
truding bearing bush so that this is
covered from underneath and from the
side.
Turn cover through 180° and refit it
on the opposite side.
Changing the door hinging
Changing the upper door hinge
over
Undo and remove screw on door
hinge .
Pull bearing bush out of the guide
on door hinge and refit it on the
opposite side.
Push cover off to the side.
105
Advertisement
Table of Contents
