Setting The Display Brightness; Setting The Temperature Unit °C/°F; Resetting To The Factory Default Settings; Accessing Information - Miele KWNS 28462 E ed/cs Operating And Installation Instructions

Selecting further settings
Setting the display brightness 
You can set the display brightness in
the segment bar:
If all segments are filled in, the max-
imum brightness is selected.
You will see the brightness change as it
is being adjusted.
Setting the temperature unit °C/°F
You can choose between degrees
Celsius °C and degrees Fahrenheit
for the temperature display.
Switching off Demo mode 
Demo mode allows the appliance to
be presented in the showroom without
the cooling system being switched on.
Do not activate this setting for do-
mestic use!
If Demo mode has been switched on as
a default setting,  will show in the dis-
play. The function can be switched off
here.
If Demo mode has been switched off it
cannot be switched on again via Set-
tings mode .
48
Resetting to the factory default set-
tings 
All appliance settings are reset to the
factory default and the appliance is
switched off.
Accessing Information 
Appliance data (model number and
serial number) is shown in the display.
Tip: This data is important when report-
°F ing an appliance fault to Miele Service.
Confirm with
tion screen.
– Displaying licence agreements
Licences used can be displayed via ©.
OK to leave the informa-