Table of Contents
Advertisement
Switching the temperature alarm off
early and checking the warmest tem-
perature
If the noise disturbs you, you can
switch the alarm off if you wish. You
can also find out what the warmest
temperature was in the respective sec-
tion.
Touch
.
The fault message is confirmed, and the
alarm will stop. The start screen ap-
pears in the display: the warmest tem-
perature recorded in the freezer will
flash for about 1 minute in the display.
Then the temperature display will
change to the current temperature in
the freezer.
You can exit from the flashing temperat-
ure display early:
Touch the temperature display.
The warmest temperature displayed will
disappear. The display will then revert
to showing the current temperature in
the freezer.
Temperature and door alarm
Door alarm
The appliance has a warning system to
avoid increased energy consumption
and food becoming warm if the doors
are left open.
If a door is left open for a long time
will light up yellow in the temperature
display and the alarm will sound four
times. If the cause of the alarm is not
rectified or if the alarm has not been
switched off early, the alarm will sound
again approx. every 3 minutes.
The period of time before the door
alarm sounds depends on the setting
selected (default setting = 2 minutes).
The door alarm can also be switched
off (see "Selecting further settings -
Setting the volume / switching off
alarms and audible tones").
The alarm will stop and
in the display as soon as the door is
closed.
will go out
35
Advertisement
Table of Contents
