Installation
Remove the cable clip from the back
of the appliance.
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Carefully push the wine conditioning
unit into position.
Niche floor
To ensure the safe installation of the
wine conditioning unit and to guarantee
its correct functioning, the floor of the
niche where the appliance is to be in-
stalled must be smooth and even.
It must be made of strong, rigid mater-
ial. The wine conditioning unit is ex-
tremely heavy when loaded and for this
reason it is imperative that the floor is
able to bear its weight. If necessary, the
advice of an architect or structural en-
gineer should be sought.
The weight of the appliance when
empty is approx. 145 kg.
When fully loaded, the weight of the ap-
pliance is approx. 375 kg.
Aligning the wine conditioning
unit
To align the wine conditioning unit,
adjust the front feet using the span-
ner supplied.
Levelling the appliance door
Make sure that you unscrew the ad-
justable foot under the lower hinge
bracket until it sits on the floor. Then
unscrew the foot by a further 90°.
Installation
59