Miele KWT 6834 SGS Operating And Installation Instructions page 71

Aligning the side of the appli-
ance door
If the appliance door is not in line with
the side walls of the appliance, the ap-
pliance door can be aligned by adjust-
ing the upper hinge bracket.
 Remove cover  from the inside of
the hinge bracket and push it out.
 Swing the cover downwards.
Changing the door hinging
 Loosen the three screws on the hinge
bracket and adjust the hinge bracket
to the left or right.
 Tighten the screws again.
 Refit the cover.
 Close the appliance door and check
that it is aligned with the side walls.
71