As soon as the set temperature has
been reached, the sensor for the re-
spective wine conditioning zone will
light up constantly. The alarm symbol
will go out as soon as the set tem-
peratures have been reached in each
zone.
The interior lighting will come on when
the door is opened.
A different setting can be set for each
zone.
Touch the sensor for the wine condi-
tioning zone you want to adjust the
settings for.
The sensor that has been selected is
highlighted in yellow.
– You can now set the temperature,
and
– switch on the DynaCool function.
Please refer to the relevant section for
more information.
If you then select a different wine con-
ditioning zone, the settings for the pre-
viously selected zone will remain un-
changed.
Switching on and off
Switching off
Touch the On/Off sensor.
If this does not work, the safety lock
is still activated.
The sensors for the two wine condition-
ing zones will then go out.
The temperature display will go out and
the mains connection symbol will
appear.
The interior lighting will go out and the
cooling process will be switched off.
19