Before Cleaning; Cleaning The Outer Casing, The Door, The Interior And Accessories - Miele KWT 6834 SGS Operating And Installation Instructions

Before cleaning

 Switch off the wine conditioning unit.
 Disconnect it from the mains.
 Take any wine bottles out of the wine
conditioning unit and store them in a
cool place.
 Take out all other removable parts for
cleaning.
 Remove the magnetic strips from the
wooden shelves before cleaning them
(see "Annotating wooden shelves").
Cleaning the outer casing, the
door, the interior and ac-
cessories
Clean the wine conditioning unit at
least once a month.
Remove soiling immediately to pre-
vent it from drying on.
 Clean the interior with a solution of
lukewarm water and a little washing-
up liquid.
 The wooden shelves should only be
wiped with a well wrung-out damp
cloth. They must not be allowed to
get wet.
 Use clean water only to wipe the
magnetic strips at the front of the
wooden shelves. Do not use a
cleaning agent as this would dam-
age the blackboard surface on the
magnetic strips.
 After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
Cleaning and care
 Use Miele stainless steel conditioning
agent (available from Miele) to clean
and care for the stainless steel sur-
faces on the inside and outside of the
appliance. Unlike stainless steel
cleaning agents, the conditioning
agent does not contain any abrasive
substances and will gently remove
soiling. Each time it is used, it forms a
water and dirt repellent protective
coating.
 Make sure you treat the stainless
steel surfaces with Miele stainless
steel conditioning agent each time
you clean them.
This will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
 Clean the appliance door with a pro-
prietary glass cleaner.
43