Sommelierset; Setting Up The Sommelierset; Fitting The Runner Covers; Inserting The Glassware Holder - Miele KWT 6834 SGS Operating And Installation Instructions

SommelierSet

Setting up the SommelierSet

The SommelierSet can be used to have
your wine ready for drinking. You can
store wine glasses and accessories in
the appliance, decant your wine and
store open bottles in the appliance.
The glassware holder  and the bottle
holder with the accessory box  can
be used either in the middle or lower
wine conditioning zone. It is important
to use a shelf which pulls out fully (the
second and third shelves in the middle
and lower zones pull out fully).
The two wooden shelves above must
be removed:
 Pull the wooden shelf out until it
stops, then lift it up and off the run-
ners. Hold onto the frame to do this.
38

Fitting the runner covers

 Place the four covers supplied 
over the runners which are now vis-
ible with the thicker side of the cover
pointing forwards.

Inserting the glassware holder

This can be used for storing and chilling
wine glasses.
 To fit glassware holder  remove the
necessary number of slats and place
the holder  on the wooden shelf.
The wine decanter can be placed in the
middle of the shelf, and stored there if
you wish.