Siemens SIPROTEC 4 Manual page 39

[sc_Integrating-NTP-ServerSubnet, 1, en_US]
Figure 2-22
Click NTP server and enter the IP address under Parameter. Change subsequently the Subnet mask
²
and the Standard gateway.
Close the DIGSI 4 System configurator and save the IEC61850 station settings.
²
Parameterizing the Device Functions
Open the SIPROTEC 4 device (see
²
Enter all desired settings (see
²
Save the parameter set and subsequently close the device.
²
NOTE
i
i
You can find more information on the settings in the SIPROTEC 4 System Description and in the device
manuals.
Update the Parameter Sets of IEC 61850
NOTE
i
i
To activate the modified parameters, you have to update the parameter set after each time you have
changed the settings in the DIGSI 4 Manager.
In the DIGSI 4 Manager, select IEC61850 station and open the dialog Properties - IEC61850 station via
²
context menu Object properties....
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015
Integrating the NTP Server in Subnet1
Figure 2-9
Figure 2-11
)
)
Configuration in DIGSI 4
2.3 Customization of the Allocations
39