Siemens SIPROTEC 4 Manual page 2

NOTE
i
i
For your own safety, observe the warnings and safety instructions contained in this document, if available.
Disclaimer of Liability
This document has been subjected to rigorous technical
review before being published. It is revised at regular inter-
vals, and any modifications and amendments are included
in the subsequent issues. The content of this document
has been compiled for information purposes only. Although
Siemens AG has made best efforts to keep the document
as precise and up-to-date as possible, Siemens AG shall
not assume any liability for defects and damage which
result through use of the information contained herein.
This content does not form part of a contract or of business
relations; nor does it change these. All obligations of
Siemens AG are stated in the relevant contractual agree-
ments.
Siemens AG reserves the right to revise this document
from time to time.
Document version: C53000-L1840-C582-1.00
Edition: 07.2015
Version of the product described: V4.7 and higher
Copyright
Copyright © Siemens AG 2015. All rights reserved.
The disclosure, duplication, distribution and editing of this
document, or utilization and communication of the content
are not permitted, unless authorized in writing. All rights,
including rights created by patent grant or registration of a
utility model or a design, are reserved.
Registered Trademarks
SIPROTEC ® , DIGSI ® , SIGUARD
are registered trademarks of Siemens AG. Any unauthor-
ized use is illegal. All other designations in this document
can be trademarks whose use by third parties for their own
purposes can infringe the rights of the owner.
® , SIMEAS ® , and SICAM ®