6.2
Configuration in DIGSI 4
For the redundant Modbus TCP, some special information is required in the Interface Settings of the
SIPROTEC 4 device
The following parameters must be set in the mapping file.
[sc_Modbus-TCP-redundancy, 1, en_US]
Figure 6-1
For time sychronisation, the following -specific settings are relevant:
TcpPortNumber
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015
Modbus TCP redundancy setting
Determines the TCP ports to listen on
Redundant Modbus TCP
6.2 Configuration in DIGSI 4
57