Identification Of Module And Firmware - Siemens SIPROTEC 4 Manual

Characteristic of the ModbusTCP Module

1.2 Identification of Module and Firmware

1.2

Identification of Module and Firmware

Modulinfo Menu
The Menu is available on the HMI display or via WebMonitor:
Select Enter → Test/Diagnosis → Modulinfo → Port B.
²
The menue shows for example module type, communication protocol, and network settings.
[sc_Modulinfo, 1, en_US]
Figure 1-2
Module type:
EN100+
EN100_O+
Communication protocol:
IEC61850
EN100_O+Modbus TCP
MLFB/Version Menu
The Menue is available on the HMI display or via WebMonitor:
Select Enter → Settings → Setup/Extras → MLFB/Version.
²
Scroll down until the version number of the firmware on EN100+ module is shown.
²
12
Modulinfo
EN100+ module with electrical Ethernet interface
EN100+ module with fiber-optic Ethernet interface
IEC 61850/GOOSE
Modbus TCP with IEC61850/GOOSE option (see chapter Further Ethernet Serv-
ices and Protocols)
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015