Siemens SIPROTEC 4 Manual page 37

[sc_System-Config-Subnet, 1, en_US]
Figure 2-20
Change the name for Subnet1 in the Properties and the parameters, e.g. IP start address, Subnet mask,
²
Standard gateway.
Click the SIPROTEC device and change its parameters in the Properties, e.g. IP address, Subnet mask,
²
Standard gateway.
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015
DIGSI 4 System Configurator - Subnet
Configuration in DIGSI 4
2.3 Customization of the Allocations
37