Configuration in DIGSI 4
2.3 Customization of the Allocations
2.3
Customization of the Allocations
Double-click the function Masking I/O (Configuration Matrix) in the DIGSI 4 dialog Select function (see
²
Figure 2-11
The dialog Settings - Masking I/O (Configuration Matrix) opens.
[sc_DIGSI4-Configuration-Matrix, 1, en_US]
Figure 2-13
(1)
Information type
(2)
Port B: Modbus TCP, system interface
(3)
Source
(4)
Destination
(5)
Port B: Modbus TCP, system interface
NOTE
i
i
You can minimize or maximize the rows and columns by double-clicking the corresponding header of the
row or the column.
Move the cursor in the columns Source and Destination over port B and determine the column assigned
²
to Modbus TCP.
The used protocol is displayed in the tooltip for B.
Adapting the Default Routing in the Configuration Matrix to the SIPROTEC 4 Device/Installation
If you do not want to change anything in the DIGSI 4 Configuration Matrix, continue with section Time
²
Synchronization below.
30
).
DIGSI 4 Configuration Matrix with Columns for System-Interface Routing
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015