Further Ethernet Services And Protocols; Services; Modbus Tcp With Iec 61850 And Goose - Siemens SIPROTEC 4 Manual

Modbus tcp profile
Hide thumbs Also See for SIPROTEC 4:
Table of Contents

Advertisement

1.5

Further Ethernet Services and Protocols

The following additional services and protocols are supported on the EN100+ module.
With DIGSI 4 these services can be switched ON or OFF.
For security reasons, Siemens recommends switching OFF unused services.

Services

1.5.1
Module homepage (HTTP)
Firmware upgrade (HTTP)
DIGSI 4 over EN100+
IEC 61850 and GOOSE
SNTP (see Chapter
For further information, refer to the manual
Ethernet Module EN100+ for IEC 61850 with electrical/optical 100 Mbit Interface, Order number C53000-
G1140-C167.

Modbus TCP with IEC 61850 and GOOSE

1.5.2
The following figure shows the communication the communication via Modbus TCP with IEC 61850 and
GOOSE.
[dw_modbus-tcp-with-iec61850, 1, en_US]
Figure 1-4
SIPROTEC 4, Modbus TCP Profile, Manual
C53000-L1840-C582-1, Edition 07.2015
4.2 Time Synchronization with Modbus TCP
Modbus TCP with IEC 61850 and GOOSE
Characteristic of the ModbusTCP Module

1.5 Further Ethernet Services and Protocols

)
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

7sj807sk80

Table of Contents