Setting the Date/Time of
the Internal Clock
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
Display the TIME/DATE page of the
DIAGNOSIS menu, and press the
For details on menu operations, see "Basic
menu operations" on page 113.
Press the MENU knob.
The TIME ADJUST setting window appears.
• HOUR: Sets the hour value.
• MIN: Sets the minutes value.
• SEC: Sets the seconds value.
• YEAR: Sets the year.
• MONTH: Sets the month.
• DAY: Sets the day.
Turn the MENU knob to move b to the
item you want to set, and press the
on the left of the selected item changes to
z and z on the left of the setting changes to
To cancel the setting
Before executing step 6, move b to ESC at the
top right of the window and press the MENU
Alternatively, flick the CANCEL/PRST /
ESCAPE switch down to the ESCAPE side.
All settings or changes are discarded and the
TIME/DATE page of the DIAGNOSIS menu
Setting the Date/Time of the Internal Clock
Turn the MENU knob to display the
desired value, and press the MENU
z changes to
and ? changes to z.
To continue the remaining settings,
repeat steps 3 and 4.
When you finish settings, turn the
MENU knob to move b to OK, then
press the MENU knob.
The internal clock is set with the date and
time set in steps 3 to 5. The TIME/DATE
page of the DIAGNOSIS menu appears
again. The time set on the TIME ADJUST
setting window is displayed.