Technical Specifications - Prolon NC2000 Hardware Manual

Technical Specifications

Supply: 24 VAC ±10%, 50/60 Hz, Class 2
Consumption: 5 VA max
Indication lights (LED): State of the communication ports / Power supply / Microprocessor state
Microprocessor: ASIX AX11015, 8 bits, 25 MHz, 512 KB FLASH memory
Battery: Super-capacitor 0.5F, keeps precise time for 10 days. This battery is only used to keep accurate
time during power outages. Does not allow the NC2000 to keep transmitting data, send alarms or
perform data logging.
Communication:
• Modbus TCP/IP (Static IP address or DHCP)
• Modbus RTU (RS485), 1 Input port and 1 Output port, up to 127 nodes
• USB
Baud rates: 9600, 19200, 38400, 57600, 115200
SD Card: Standard size only, SDSC or SDHC, FAT16 or FAT32
Connections: Removable screw-type terminal blocks (16 AWG max) for power and RS485, modular RJ45
jacks for Ethernet / RS485, USB female type A for local PC connection and DIN Rail connector or 4 screws
for panel mount.
Dimensions: 5.39" x 4.41" (137mm x 112mm) Non-Condensing
Environment: 32-122 ºF (0-50 ºC) Non-Condensing
Certification: UL916 Energy Management Equipment, CAN/CSA-C22.2, RoHS
The performance specifications are nominal and conform to acceptable industry standards. ProLon Inc. will
not be liable for damages resulting from misapplication or misuse of its products.
REV. 6.1.6 / PL-HRDW-NC2000-C/F-EN
13