Advertisement
10. Bow Reel
Identify parts 83, 84, 85 and 86.
83
84
85
86
Glue the sides 83 to the main piece 84.
After sanding and painting place reel and pin
and fix the pin with a drop of medium super
glue. If necessary you have to sand down the
reel on both sides to fit between the two sides.
11. Stairs
Glue the parts 59 and 60 to build the stairs.
Varnish and sand.
60
60
59
60
Stand November 2007
83
59
Seite 14
12. Radar
Cut out the two halves (101) of the radar at the
vertical end. Then sand the edge on a flat pie-
ce of abrasive paper, grade 600 down to
measure. Now glue the two halves together
and paint if wished. Place the sticker onto the
front.
101
13. Throttle Lever
Make the throttle lever from parts 102, 103 and
104. Bend the lever from brass wire 1,5 x 25
mm. Drill a hole of 1.5 mm into the base (102)
and round the upper edges. Glue handle (104)
on the lever. After painting the lever can be
glued into the base.
102
©
Krick Modelltechnik Knittlingen
Advertisement
