Advertisement
Glue parts 55 and 56 on.
On the side of the flybridge wall sand the pro-
truding parts of the bolsters flat.
4. Ladder to Flybridge
Prepare parts 61, 64, 67 und 68 and build the
ladder to the flybridge.
Stand November 2007
68
Glue the first two distance tubes 5 mm from
the lower end of both vertical rods. Then place
alternately one Step and two distance tubes
onto the rods and fix the with a drop of super-
glue.
Drill the holes for the ladder at the correct
place into the cockpit floor. Then bend the
upper end of the longer rod at a distance of 30
mm from the highest step horizontally to the
side.
30 mm
Biegen Sie die Relingstütze aus Brass Wire
1,5 x 45 mm (69).
Seite 11
61
64
67
drill
©
Krick Modelltechnik Knittlingen
Advertisement
