Adjusting The White Balance Manually - Sony DCR-IP45 Operating Instructions Manual

Adjusting the white balance manually

You can manually adjust and set the white balance. This adjustment makes white
subjects look white and allows more natural color balance. Normally white balance is
automatically adjusted.
(1) Set the POWER switch to CAMERA or MEMORY/NETWORK (DCR-IP55 only) .
(2) Press FN to display PAGE1.
(3) Press MENU, then select WHT BAL in
54
white balance mode (p. 175).
HOLD : Recording a single-colored subject or background
(OUTDOOR) :
•Recording a sunset/sunrise, just after sunset, just before sunrise, neon signs, or
fireworks
•Under a color matching fluorescent lamp
n (INDOOR) :
•When lighting conditions change quickly
•In too bright places such as photography studios
•Under sodium lamps or mercury lamps
2
FN
3
MANUAL SET
PROGRAM AE
P EFFECT
FLASH LVL
WHT BAL
N. S. LIGHT
AUTO SHTR
EXIT
AUTO
HOLD
OUTDOOR
INDOOR
EXEC RET.
in the menu settings to select a desired
1