Download  Print this page

Recording An Image From A Tape As A Still Image - Sony DCR-IP45 Operating Instructions Manual

Digital video camera recorder.
Hide thumbs

Advertisement

Table of Contents
Recording an image from a tape as a still
image
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick."
Your camcorder can also take in moving picture data from other equipment through the
input connector and record it as a still image on a "Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press
(3) Keep pressing PHOTO lightly until the picture from the tape freezes. CAPTURE
appears on the LCD screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the LCD screen will be recorded on
a "Memory Stick." Recording is complete when the bar scroll indicator disappears.
2
Image size of still images
Image size is automatically set to 640 x 480.
When the "Memory Stick" access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off, eject a "Memory
Stick" or remove the battery pack. Otherwise, the image data breakdown may occur.
If
The inserted "Memory Stick" is incompatible with your camcorder because its format
does not comform with your camcorder. Check the format of the "Memory Stick."
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record audio from a tape.
122
. The picture recorded on the tape is played back.
3
PHOTO
MEMORY STICK FORMAT ERROR appears on the LCD screen
4
SFN
1 / 40
640
CAPTURE
FN
SFN
640
PHOTO
1
CAMERA
MEMORY/
NET-
WORK
VCR
POWER
FN
(CHG)
OFF
ON
MODE

Advertisement

Table of Contents

   Related Manuals for Sony DCR-IP45

This manual is also suitable for:

Dcr-ip55

Comments to this Manuals

Symbols: 0
Latest comments: