Charging The Battery Pack - Sony DCR-IP45 Operating Instructions Manual

Step 1 Preparing the power supply

Charging the battery pack

Charge the battery pack before using your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (F series).
See page 196 for details of the "InfoLITHIUM" battery pack.
(1) Open the DC IN jack cover and connect the supplied AC power adaptor to the DC
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHG).
2
3
To a wall outlet
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
Note
Prevent metallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
18
IN jack on your camcorder with the plug's v mark facing up.
The battery CHG lamp lights up when the charge begins. After charging is
completed, the battery CHG lamp goes off (full charge).
1
4
CAMERA
MEMORY/
NET-
(CHG)
WORK
OFF
VCR
ON
MODE
POWER
Battery CHG lamp