Reading The Various Current Values - REMEHA Gas 210 ECO PRO Installation, User And Service Manual

6.4

Reading the various current values

Fig.9 Reading the current values
2x
7698035 - v.01 - 19022018
The following current values can be read in the information menu
= Status.
= Sub-status.
= Flow temperature (°C).
= Return temperature (°C).
= Boiler temperature (°C).
= Outside temperature (°C). (If connected).
= Heat exchanger temperature (°C).
= Internal setpoint (°C).
= Ionisation current (μA).
= Fan speed (rpm).
= Water pressure (bar). (If connected).
= Supplied heat output (%).
The current values can be read as follows:
1. Navigate to the information menu
The
2. Confirm the menu selection with the
The screen alternates between the
status, e.g.
3. Press the
The screen alternates between the
sub-status, e.g.
4. Press the
The screen alternates between the
flow temperature, e.g.
5. Press the
various parameters.
At a certain point, the readout cycle starts again with the
rameter.
6. Press the
AD-4000049-01
symbol flashes in the menu bar.
.
key.
.
key.
°C.
key several times consecutively to scroll through the
key twice to go back to the main display.
6 Settings
:
key.
parameter and the current
parameter and the current
parameter and the current
pa­
13